VO01FDMR is an adapter that lets you connect your new aftermarket head unit to the factory amplifier via the RCA outputs. Works when the OEM amplifier receives a low-level signal through a round 6-pin DIN connector, like in many Volvo models.
- Amplifier Retention Adapter
- 4 channels (front/rear left/right)
- With remote turn-on
- RCA to 6-pin DIN
- For Volvo cars
Amplifier Retention Adapter
If you've installed a new head unit and experience no sound, you might have a factory amplifier in your car. This amplifier usually gets a signal from a different connector than the head unit, which is where this adapter comes in. Simply connect this harness between the DIN connector in your car and the RCA outputs & the remote output, and run the amplifier on the RCA outputs from your new head unit.
Compatible with
Volvo
Volvo 850 1994-1998
Volvo 940 1994-1998
Volvo 960 1994-1998
Volvo C70 1997-2005
Volvo S40 2000-2004
Volvo S60 2000-2009
Volvo S70 1997-2000
Volvo S80 1998-2004
Volvo S90 1996-2000
Volvo V40 2000-2004
Volvo V70 1997-2000
Volvo V70 2000-2007
Volvo V90 1996-2000
Volvo XC70 1997-2000
Volvo XC70 2000-2007
Note: for cars with OEM amplifier - High Performance / Premium Sound
Specifications
Recommended head unit signal: 1.5V-5V
Pre-out: 4 channels
Blue wire: 12V remote turn-on
- Logistics Information
- Product Safety Information
Logistics Information
| SKU | VO01FDMR |
| Product Type | Amplifier Retention |
| EAN/GTIN | 7394409013628 |
| Product Status | Active |
| Weight (each) | 0.04 kg |
| Unit | pcs |
| Packaging Dimensions (each, W x H x D) | 12.0 x 14.0 x 2.0 cm |
| Master Carton Quantity | 300 |
| Master Carton Weight | 12.1 kg |
| Master Carton Dimensions (W x H x D) | 49.0 x 26.0 x 30.0 cm |
Product Safety Information
Intended Use
This product is intended for general automotive or workshop use, as specified on the packaging or in related documentation. Use only as intended.
Safety Instructions
- Always read all labels and instructions before use.
- Keep out of reach of children.
- Use with appropriate tools and protective equipment where applicable.
- Do not modify the product.
- Avoid exposure to moisture, extreme temperatures, or physical damage.
- For electrical products: Disconnect power before installation. Ensure correct polarity and use proper fuses.
Installation & Handling
Installation or use must be carried out by a competent person. Improper handling may result in injury or damage.
Maintenance
Check regularly for damage or wear. Stop using the product if it appears damaged.
Disposal
Dispose of this product in accordance with local regulations for electrical and electronic waste or general waste, as applicable.
Manufacturer Information
Distributed by:
Winn Scandinavia AB
Idrottsvägen 37
702 32 Örebro, Sweden
winnscandinavia.com
