VE210 is a robust, vented subwoofer enclosure for dual 10 inch / 25 cm subwoofers. Finished in a pleasant black carpet, this subwoofer enclosure adds a lot of punch without sacrificing too much trunk space.
- Vented enclosure
- Dual 10 inch
- Slot port with 50 Hz tuning
- Built with 18 mm MDF
- Wedge shape
- Screw terminals with included speaker wire
- Dark carpet
Vented Enclosure
The clear benefit of a vented subwoofer enclosure is that it makes your subwoofer more efficient - in simple terms, it gets louder with an entirely different sound than you would typically get from a sealed enclosure.
Box Built to Perform
Good bass starts with a solid enclosure. The VE210 is made from 18 mm MDF with reinforcements in the corners and along the sides to reduce resonance and keep the structure rigid. All joints are sealed with gaskets to ensure air stays where it should - inside the box.
Dual Terminals
With two terminals, you can easily choose how to wire your subwoofers - whether in series, parallel, or separately, depending on your setup. The terminals are placed close together for shorter cable runs and a smooth installation.
Specifications
Dimensions: 870 x 286 x 366/320 mm
Net volume: 60 L / 2.12 ft³
Material: 18 mm MDF
Tuning: 50 Hz
Mounting diameter: 234 mm
- Logistics Information
- Product Safety Information
Logistics Information
| SKU | VE210 |
| Product Type | Vented Enclosure |
| EAN/GTIN | 7394409028912 |
| Product Status | Active |
| Weight (each) | 18.4 kg |
| Unit | pcs |
| Packaging Dimensions (each, W x H x D) | 89.0 x 32.5 x 41.0 cm |
| Master Carton Quantity | 1 |
| Master Carton Weight | 18.4 kg |
| Master Carton Dimensions (W x H x D) | 89.0 x 32.5 x 41.0 cm |
Product Safety Information
Intended Use
This product is intended for general automotive or workshop use, as specified on the packaging or in related documentation. Use only as intended.
Safety Instructions
- Always read all labels and instructions before use.
- Keep out of reach of children.
- Use with appropriate tools and protective equipment where applicable.
- Do not modify the product.
- Avoid exposure to moisture, extreme temperatures, or physical damage.
- For electrical products: Disconnect power before installation. Ensure correct polarity and use proper fuses.
Installation & Handling
Installation or use must be carried out by a competent person. Improper handling may result in injury or damage.
Maintenance
Check regularly for damage or wear. Stop using the product if it appears damaged.
Disposal
Dispose of this product in accordance with local regulations for electrical and electronic waste or general waste, as applicable.
Manufacturer Information
Distributed by:
Winn Scandinavia AB
Idrottsvägen 37
702 32 Örebro, Sweden
winnscandinavia.com
